Queen Bee for June – Love Letters Block Tutorial

Today I am sharing the tutorial I put together for my Stash Bee hive mates in case you are interested in making some “Love Letter” blocks, too!

Love Letters Block Tutorial

When I was notified that I had been accepted into the Stash Bee in Hive 2 this year, I knew what my design inspiration for my month was going to be: the envelopes from the notes, love letters, and cards that my husband has given me over the years.

Love Letter Envelopes

As you can see from a sample of the envelopes in the image above, the envelopes are handmade and typically made from maps or other found / recycled materials. When I read the Missouri Star Quilt Co.’s Color Issue of the Mod Block magazine, I knew that the Noted quilt was going to be perfect!

The instructions in this tutorial are not the same as those in the magazine; I created this tutorial using my typical piecing methods and I have changed the dimensions slightly to create the love letters block.

Colors / Fabrics

Requested Colors

For my quilt, I chose to work with blue, orange, teal, or grey as the main color for the love letter blocks. To make the block, you will need to select two fabrics in the color of your choice: a darker tone and a lighter tone.

For the background fabric, I chose to work with low volume prints that contrast with the main fabrics you selected in a Kona White to Kona Bone color range.

Fabric Needed

Fabric Required

• Two 9.5-inch squares for the body of the envelope
• One 9.5-inch square for the top of the envelope
• Three 9.5-inch squares of background fabric (does not need to be the same material)

Piecing Instructions

The love letter block is made from (4) 8.5-inch unfinished half-square triangles (HSTs). You may chose to create your HSTs using any method you are familiar and comfortable with. I prefer to create oversize units and trim them back to their exact unfinished size. I have found this allows me much higher piecing accuracy during block construction. The method I am going to describe creates (2) HSTs of one color combination at once and is the basis for the cutting instructions above.

HST Step 1

Place (2) 9.5-inch squares right sides together with the background fabric on top. On the wrong side of the background fabric, mark one diagonal line from corner to corner.

HST Step 1

HST Step 2

Sew a quarter inch seam allowance on either side of the marked diagonal line.

Tip: Check to see if moving your needle all the way to the right and sewing with the marked line centered creates a scant quarter inch seam allowance. Other HST seam allowance tips can be found on my blog: HST Piecing Tip (be sure to check the comments, too!)

HST Step 2

HST Step 3

Cut into (2) triangles along the marked diagonal line.

Tip: Iron the blocks to set your seams prior to Step 3.

HST Step 3

HST Step 4

Tip: Use a square grid ruler with 1/2″ grid increments to make trimming HSTs to size quick and easy.

HST Step 4

Block Assembly

Block Assembly

The (6) 9.5-inch squares will yield (6) 8.5-inch HSTs. From the (6) HSTs, select (3) of the primary fabric and background and (1) from the secondary fabric and background.

Block Assembly – Layout

Following the layout shown above, sew together the rows.

Block Assembly – Sew Together Rows

Then sew the rows together to complete the block. The block should measure 16.5-inches square.

Love Letter Blocks

Tips and Tutorials Tuesdays

Linking up to Tips and Tutorials Tuesdays.